Driveway Coating in Redwood City, CA

From narrow bungalow driveways near downtown to steep drives up in Emerald Hills, Redwood City concrete gets plenty of sun and plenty of tree litter. We coat driveways in Redwood City, CA with UV-stable, slip-resistant systems that keep stains out and make cleanup quick.

(650) 995-9944

Get a Free Estimate

Tell us about the floor. Only your name and phone are required.

Form powered by splitforms

Narrow bungalow driveway with a fresh tan flake coating leading to a detached garage in Redwood City, CA

A city with many kinds of driveways

Redwood City's old slogan, "Climate Best by Government Test," still fits. Summers are warm and dry, winters are mild with most of the rain falling from November through March, and freezes are rare. That climate is easy on concrete in some ways, but long months of sun and dry dust wear down bare driveways, and the winter rains bring tree debris and stains.

Each part of the city has its own driveway style:

  • Mount Carmel, Central and Stambaugh-Heller. Early 1900s and 1930s bungalows with narrow driveways to detached garages, often cracked from age and tree roots.
  • Farm Hill, Woodside Plaza and Roosevelt. Mid-century ranches with standard two-car driveways.
  • Emerald Hills. Steep, curving hillside driveways under redwoods and oaks.
  • Redwood Shores. Townhomes and single-family homes with shorter aprons, many governed by HOAs.

Redwoods, oaks and stains

Coast redwoods and live oaks shed needles, leaves and small cones all year, and those materials contain tannins that leave brown stains on bare concrete, especially after the first rains of the season. Shaded hillside driveways also grow algae and moss that make them slippery. A coating blocks those stains from soaking in and gives a surface you can rinse clean. Every exterior system we install has anti-slip grit, which is a must on steep Emerald Hills drives.

Older hillside driveway with tannin stains from redwood and oak debris before coating in Emerald Hills near Redwood City, CA

Redwood Shores and settling ground

Redwood Shores was built on filled bay marsh land, and some concrete there has settled unevenly over the years. Small lips at joints can often be ground flat and cracks filled before coating. Larger settlement needs to be corrected by lifting or replacing slabs, and we will tell you if that is the case rather than coating over a problem. If you are in an HOA, we can provide product sheets and samples for architectural review.

The right products outside

Ordinary epoxy turns yellow in sunlight, so we do not use it as a driveway topcoat. Our driveway systems use UV-stable polyaspartic or aliphatic urethane topcoats over a colored base, with decorative flake if you want it. For owners who prefer the look of bare concrete, a clear coating or a penetrating sealer adds protection with little change in color.

What to expect

  1. Visit and quote. We look at the slab, check moisture and bring samples.
  2. Prep. Grinding to remove old sealer and weak surface, stain treatment, crack repair.
  3. Coat. Base color, optional flake, then a UV-stable topcoat with grit.
  4. Cure. Walk on it in a few hours, drive on it in about 24 to 48 hours.

The best months for driveway coating are April through October, when the slab is dry and rain is unlikely. We can work in winter during dry spells, but we will not coat damp concrete.

Tree roots and the city sidewalk

Street trees in older neighborhoods often lift sidewalks and the ends of driveways. We coat your private driveway and leave the public sidewalk and curb cut as they are. If a root has badly lifted your slab, ask a certified arborist before cutting it, since the health of the tree may depend on it.

Care

Blow or sweep off needles and leaves regularly, especially before rain. Clean oil spots quickly. A gentle rinse handles most dirt. After several years, a new topcoat refreshes the finish.

Common questions

How long will a coated driveway last? With good prep, a quality outdoor system lasts many years. The topcoat takes the wear, and recoating it every several years is much less costly than a full redo.

Can you match my garage floor? Yes. We can use the same color and flake blend inside and out, with a UV-stable topcoat on the driveway portion.

Do you work on rental properties? Yes. Landlords near downtown and Redwood Shores like the easy cleanup between tenants.

Will the finish stain from redwood debris? Needles and leaves can still leave marks if they sit wet on the surface for weeks, but the stain stays on top of the coating and usually rinses or scrubs away rather than soaking into the concrete.

Related services

Many homeowners pair a driveway with a matching garage floor; see our epoxy flake flooring page. For simple protection, our concrete sealing may be enough. We also serve San Carlos, Menlo Park, Atherton and Woodside.

Ready for a cleaner driveway?

Call (650) 995-9944 for a free estimate and color samples.