Testing
On bay fill near the Shores, slabs can carry moisture. In the hills, water can run into the garage. We test every slab.
Prep
Diamond grinding with dust extraction, crack repair and patching.
Coating
Primer, color base, optional chips and a clear topcoat.
Electric vehicles
Many Redwood City garages house EVs and chargers. We coat carefully around chargers and conduit.
Cure
Walk the next day, park after about a week.
Can you coat around my EV charger?
Yes.
Is it dusty?
We use vacuum-equipped grinders.
Storage and shelving
Many garages here double as storage for bikes, camping gear and boxes. We can help plan where wall racks go so the floor stays open and easy to clean.
Garage floor epoxy for Redwood City
Garage floor epoxy in Redwood City starts with a moisture test, especially in hillside homes and near the bay. Then we grind to open the slab, repair cracks, apply a primer suited to the moisture level and build a body coat with color or flake. A UV-stable clear top finishes it and handles tires, tools and the extra weight of electric vehicles.
Questions about garage floors
Do you coat townhome garages in the Shores? Yes, with HOA approval and coordination for shared areas.
How long is the garage out of use? Usually two to three days before parking.
Can you coat a single-car garage in an older neighborhood? Yes, often.
Before we arrive
Clear the garage, unplug floor-level items and plan parking for a few days.
EV chargers and storage
Many Redwood City garages have wall-mounted EV chargers and overhead storage. We mask and protect charger units, coat neatly around mounts and keep cables safe during the work. Heavier electric vehicles are no problem for a properly built system. Install wall cabinets after the floor cures for a clean edge underneath.
Install days
Day one is grinding, crack repair, primer and the body coat. Day two is the clear top. You get written times for walking, moving things back and parking.
Price factors
Size, moisture, crack repair and the system you choose all affect cost. Hillside garages that need a moisture-mitigating primer cost a bit more, and we explain why in the written estimate.
Shared garages
In condo garages we coordinate with the HOA and post notices so neighbors know when stalls are off limits.
Planning an epoxy floor around an EV and a charger
Electric cars are everywhere on the Peninsula, and the charger on the garage wall changes how a floor should be planned. EVs are heavy, their tires stay warm after a drive, and the charging cable often lies across the slab. We place the color line, texture and any parking stripes with the charger location in mind, so the cable rests on a durable, easy-to-wipe surface rather than a thin spot near the wall.
Before grinding we confirm where the conduit enters the floor or wall and mask the charger itself. Afterward, the base coat runs right up to the mounting plate, and the topcoat seals the edge. If you plan to add a second charger later, tell us at the visit, and we will leave the area ready so an electrician can mount it without cutting through the new coating.
Why the weight matters
A battery-electric SUV can weigh far more than the gas car that used to sit in the same spot. Thin roll-on kits soften under that load and lift where tires turn. A ground surface and a proper epoxy build give the floor enough body to carry the weight without scuffing at the turning point near the door.
Daily life on the finished floor
Coiling the cable on a wall hook keeps it from being run over and scraping the topcoat. A quick dry mop handles the dust that blows in from the street, and a damp mop takes care of brake dust and tire marks. Keep a small mat under the charging port area if the car drips after a rainy commute.
Question about EV garages
Does the coating affect charging at all? No. The coating is on the floor and has no effect on the charger or the car. It simply protects the slab and makes the space easier to keep clean.
Get a garage estimate
Call (650) 995-9944.